ESAB PT-35 Manuel D'instruction page 144

SECTION 5
WARNING
Make sure that the power
source has been turned off
and that primary power
has been disconnected
before proceeding.
6. Removal and Replacement of the Torch Body
PT-35 Torch
1. Unscrew the right hand threaded handle (clockwise) from the torch body
and slide it back onto the torch cable assembly in order to expose the
torch connections.
Handle
2. Unscrew the main power cable fitting from the torch's power lead by using
a 7/16" (11.1mm) and a 5/8" (15.9mm) wrench.
Apply pressure to the 7/16" wrench in direction shown by the arrow.
144
MAINTENANCE
Main Power Cable
7/16"
5/8"
Torch Body