Dimensional Data - ESAB PT-35 Manuel D'instruction

SECTION 2
WARNING
DO NOT use oxygen with
this torch! A hazardous fire
may result.
2.0 DESCRIPTION
This booklet covers accessories, maintenance, and parts information for the PT-
35 plasma torches. For installation and operating instructions for your cutting
package, refer to your power source instruction manual.
The PT-35 is a 50 amp capacity, pilot-arc mechanized torch available in 4 different
versions. The torch uses clean, dry air as the cut gas for cutting carbon steel,
aluminum, or stainless steel.
PT-35
With Rack; 7.6m (25 ft.) ..........................................................................................0558004351
With Rack; 15.2m (50 ft.) .......................................................................................0558004352
Without Rack; 7.6m (25 ft.) ...................................................................................0558004353
Without Rack; 15.2m (50 ft.) ................................................................................0558004354

Dimensional Data

85
DESCRIPTION