Removing Blackmagic Converters Setup; Updating Your Atem Converter's Software; Setting The Tally Border And Camera Number - Blackmagic Design ATEM Manuel D'installation Et D'utilisation

Removing Blackmagic Converters Setup

To remove the Blackmagic Converters software on Mac OS X, launch the Blackmagic
Converters.dmg installation file, double click on 'Uninstall Converters' and simply follow
the prompts.
To remove the Blackmagic Converters software on Windows, open the Windows control panel
and click on 'Programs and Features'. Select 'Blackmagic Converters' from the list, click on
'Uninstall' and follow the prompts.

Updating your ATEM Converter's Software

After installing Blackmagic Converters Setup on your computer, connect a USB cable between
the computer and your ATEM Converter. Launch Blackmagic Converters Setup and follow any
onscreen prompt to update the internal software in your ATEM converter. If no prompt appears,
the internal software is up to date and there is nothing further you need to do.

Setting the Tally Border and Camera Number

In addition to tally lights, you can also display a tally border on an SDI or HDMI monitor
connected to your ATEM Camera Converter. This option is set using Blackmagic Converters
Setup, where you can also set the camera number.
1 Connect an ATEM Camera Converter to your computer via USB.
2 Launch Blackmagic Converters Setup, select your ATEM Camera Converter and click
the 'settings' tab.
3 Set the camera number and also choose whether to show a tally border on the monitor
attached to the ATEM Camera Converter. Click 'save' to confirm your settings and exit
Blackmagic Converters Setup.
If you chose not to display a tally border, the tally lights on the ATEM Camera Converter will still
illuminate when your camera is live on the program output of the ATEM switcher.
You can easily change the 'camera number' setting for your ATEM Camera
Converter using Blackmagic Converters Setup. You can also choose
whether or not to display a tally border around your connected monitor by
checking or unchecking the 'show tally on my video output' checkbox.
Using Blackmagic Converters Setup 20