Construction - Bartscher 900 Serie Manuel D'installation, D'entretien Et D'emploi


Main structure in steel with 4 adjustable height feet.

Panels in stainless steel AISI 304, thickness 10-12/10.

Cooking vat in stainless steel AISI 316, thickness 20/10.

Lid in stainless steel, hinged and spring balanced in all opening positions.

Chrome-plated brass drainage tap.

Vat heating controlled by means of high efficiency stainless steel tubular burners resistant to mechanical
and thermal stress.

The gas supplied to the burner is adjusted by a cock.

The appliance has a pilot burner with fixed injector, besides piezoelectric ignition.

The safety of the appliance is ensured by a thermocouple that cuts off the gas flow if the pilot burner
should turn off for any reason.

The cold water connection is 10 mm.

The hot water connection is 10 mm.

The appliance is equipped with a mixer tap.
1.3.1. SPECIAL FEATURES ONLY FOR INDIRECT KETTLES

Stainless steel cooking vat and chamber.

To ensure safe operation, the appliance is equipped with the following devices:

Steam safety valve set at 0.5 bar;

Pressure gauge for steam pressure reading;

Jacket steam trap;

Steam pressure switch set at 0.5 bar;

Jacket water supply with level control by means of taps.

Safety thermostat to interrupt operation automatically in case of failures.
Instuction manual for installation, maintenance and use
Gas kettles S. 900

1.3. CONSTRUCTION

01.08.00 page 38