Technical Data - Aqua Medic Kauderni LED CF Mode D'emploi

3.7. Maintenance
The collection cup should be cleaned regularly (daily or weekly, depending on the organic load).
The reaction pipe of the skimmer needs to be cleaned only once or twice a year. The venturi pump
should also be cleaned from time to time. The pump has to be removed and the complete pump
housing and mesh wheel flushed with clean water. The same procedure should be undertaken with
the air injection nozzle.
4. Lighting 2 x Ocean Light LED 36 W

4.1. Technical data

Power requirements: 100 - 240 V AC, 50 - 60 Hz.
- 3 watts high-performance LEDs
- total lumen 4.944
- colour temperature 14,000 K
- safety voltage 24 V with external power pack
Version:
- Ocean Light LED 36 watts (4 x 3 watts blue and 8 x 3 watts 12,000 K)
Dimensions (l x w x h): approx. 600 x 120 x 25 mm
The body is made of anodized aluminium. The cooling is done passively.
4.2. Unpacking
Control the lighting system immediately after unpacking with respect to any damages. In case of
complaints, please contact your dealer directly.
Included in shipment:
Ocean Light LED incl. power pack 24 V DC output
•
Aquaria fixing
•
Fig. 5: Holder for Ocean Light LED
The holder are adjusted using a crosstip screwdriver so that the lights are safely placed in the
guide rails. If a control cable is used, the lights have to be adjusted by moving the holder.
16