Basic Settings Of The Digital Trim - Reely Bimot Notice D'emploi

14.

Basic Settings of the Digital Trim

Before testing the control functions at the model, you must review the current position of the digital trimming or set it
correctly.
The transmitter has four trimming buttons (also see figure 1, item
5, 6, 9 and 11), with the help of which the „electronic centre posi-
tion" of the two control levers can be corrected.
When the model tends to fly to the left all the time later, for examp-
le, you may set the rudder with the rudder trimming later so that
the model flies straight again.
The trimming can be set during the flight.
Every short push on the trimming buttons makes the transmit-
ter issue a short signal sound that becomes higher or lower
depending on the movement direction of the trim button. If the
Figure 8
trim button is deflected and held, the sound is issued at a quick
sequence.
When the centre position is reached, a double signal is issued. The end of the respective setting area is signalled with
a longer signal sound. The entire trimming path is approx. 30 single steps.
Put all four trim buttons to the centre position now.
46