Rudder Function (Mode 1 And Mode 2) - Reely Bimot Notice D'emploi

f) Rudder Function (Mode 1 and Mode 2)
If the control stick for the rudder function (see figure 1, item 4) is moved to the left, the elevator must deflect to the
left. The rear rudder edge must be deflected to the left by approx. 5 – 6 mm. In flight, the landing gear is pressed to
the right and the model flies to the left. At the same time, the front undercarriage is deflected to the left. You can also
change the direction on the ground this way.
If the control stick for the rudder function (see figure 1, item 4) is moved to the right, the elevator must deflect to the
right. The rear rudder edge must be deflected to the right by approx. 5 - 6 mm. In flight, the landing gear is pressed to
the left and the model flies to the right. At the same time, the front undercarriage is deflected to the right. You can also
change the direction on the ground this way.
52
Figure 19
Figure 20