Model Information - Horizon Fitness GR3 Manuel D'utilisation

MODEL INFORMATION

Tension Control Knob & Emergency Brake
Saddle
GR6
SHOWN
Seat Slider
Seat Post
Durable Crank
10
HZ18_GR3-5-6 OM r1_4_A.indd 10-11
Adjustment Knob
Heavy Flywheel
Transportation Wheel
( GR6 SHOWN )
PRE ASSEMBLY
MAIN PARTS INCLUDED:
1 Main Frame
Front & rear stabilizer UNPACKING
Handlebar Set
Handlebar Mast Set (Only GR6) Due to the weight of the indoor cycle, it is recommended that two persons
perform the assembly. Set the indoor cycle in a cleared area and remove all
Seat Post Set
packing materials; do not dispose of the packing materials until assembly is
Pedal Set
completed.
PARTS PACKING
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and
INCLUDED:
partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any
1 Parts box
grease, such as lithium bike grease is recommended.
1 Owner's Manual
NEED HELP?
If you have questions or if there
are any missing parts, contact your
local dealer. Contact information
may be located on the back panel
of this manual or on warranty card.
GR3
GR5
GR6
11
4/26/18 9:13 AM