Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GR3 ASSEMBLY STEP 1
HARDWARE FOR STEP 1 :
NO.
DESCRIPTION
GR3
1
HANDLEBAR
2
SEAT POST
3
LEFT PEDAL
4
RIGHT PEDAL
5
COMBINATION WRENCH
2
3
5
4
12
HZ18_GR3-5-6 OM r1_4_A.indd 12-13
A
Install the HANDLEBAR (1) into the frame receptor
and secure with the knob.
QTY
B
Install the SEAT POST (2) into the frame receptor
1
and secure with the knob.
1
C
Thread the LEFT PEDAL (3) that has "L" on the
1
spindle to the left side arm of the cycle using the
1
COMBINATION WRENCH (5). Please note that
1
the L pedal is left-hand threaded which needs to be
turned counter clockwise to tighten.
D
Thread the RIGHT PEDAL (4) that has "R" on the
spindle to the right side arm of the cycle using the
COMBINATION WRENCH (5). Please note that the
1
R pedal is right-hand threaded which needs to be
turned clockwise to tighten.
GR3 ASSEMBLY STEP 2
HARDWARE FOR STEP 2 :
NO.
DESCRIPTION
6
ALLEN WRENCH
7
ALLEN BOLTS (M8 X 16L)
8
WASHERS
9
FRONT STABILIZER
10
REAR STABILIZER
6
7
8
10
A
Attach the FRONT STABILIZER (9) to the frame
using 2 ALLEN BOLTS (7) and 2 WASHERS (8),
QTY
and secure firmly by ALLEN WRENCH (6).
1
B
Attach the REAR STABILIZER (10) to the frame
8
using 2 ALLEN BOLTS (7) and 2 WASHERS (8),
8
and secure firmly by ALLEN WRENCH (6).
1
1
6
7
8
9
GR3
13
4/26/18 9:13 AM
Publicité
Table des Matières
