Horizon Fitness GR3 Manuel D'utilisation page 9

GR6 ASSEMBLY STEP 1
HARDWARE FOR STEP 1 :
NO. DESCRIPTION
GR6
1 BOLTS
2 NUTS
3 WASHERS (M8)
4 FRONT STABILIZER
5 REAR STABILIZER
6 WRENCH
6
2
3
5
2
3
1
16
HZ18_GR3-5-6 OM r1_4_A.indd 16-17
A Attach the FRONT STABILIZER (4) and REAR
STABILIZER (5) to the frame using 4 BOLTS (1)
QTY
and 4 WASHERS (3) and 4 NUTS (2), and secure
4
firmly by WRENCH (6).
4
4
1
1
1
6
2
3
4
1
GR6 ASSEMBLY STEP 2
HARDWARE FOR STEP 2 :
NO. DESCRIPTION
6 WRENCH
7 HANDLEBAR MAST
8 SEAT POST
9 RIGHT PEDAL
10 LEFT PEDAL
7
8
10
6
9
A Thread the LEFT PEDAL (10) that has "L" on the
spindle to the left side arm of the cycle using the
QTY
WRENCH (6). Please note that the L pedal is left-
1
hand threaded which needs to be turned counter
1
clockwise to tighten.
1
B Thread the RIGHT PEDAL (9) that has "R" on the
1
spindle to the right side arm of the cycle using the
1
WRENCH (6). Please note that the R pedal is right
hand threaded which needs to be turned clockwise
to tighten.
C Install the HANDLEBAR MAST(7) into the frame
receptor and secure with the quick release.
D Install the SEAT POST(8) into the frame receptor
and secure with the quick release.
GR6
17
4/26/18 9:13 AM