GR5 ASSEMBLY STEP 1
HARDWARE FOR STEP 1 :
NO.
DESCRIPTION
GR5
1
REAR STABILIZER
2
BOLTS
3
NUTS
4
WASHERS
5
WRENCH
6
FRONT STABILIZER
3
4
1
2
5
14
HZ18_GR3-5-6 OM r1_4_A.indd 14-15
A
Attach the REAR STABILIZER (1) to the frame
using 2 NUTS (3), 2 WASHERS (4) and 2 BOLTS
QTY
(2), and secure firmly using the adjustable
1
WRENCH (5).
4
B
Attach the FRONT STABILIZER (6) to the
frame using 2 NUTS (3), 2 WASHERS (4) and 2
4
BOLTS (2), and secure firmly using the adjustable
4
WRENCH (5).
1
1
3
4
2
6
GR5 ASSEMBLY STEP 2
HARDWARE FOR STEP 2 :
NO.
DESCRIPTION
5
WRENCH
7
RIGHT PEDAL
8
LEFT PEDAL
9
HANDLEBAR
9
8
5
7
A
Thread the LEFT PEDAL (8) that has "L" on the
spindle to the left side arm of the cycle using the
QTY
adjustable WRENCH (5). Please note that the
1
L pedal is left-hand threaded which needs to be
1
turned counter clockwise to tighten.
1
B
Thread the RIGHT PEDAL (7) that has "R" on the
1
spindle to the right side arm of the cycle using the
adjustable WRENCH (5). Please note that the R
pedal is right-hand threaded which needs to be
turned clockwise to tighten.
C
Install the HANDLEBAR (9) into the frame receptor
and secure with the quick release.
GR5
15
4/26/18 9:13 AM