Table des Matières
Publicité
Explosion-Proof
Protection：Some
unusual condition of
E6
power or voltage that
cause damage to the
motor drive circuit.
---
No display
No working
The running belt is not
smooth
The running belt is
slipped
1.The power voltage is too small
2.The burn small from controller
Safty key faulty
a.No power
b.Safety key faulty
c.Short circuit
d.The power switch is not open
a.The Lub is not enough
b.Running belt is too tight
a.The belt is too loose
b.The motor belt is loose
Use the standard volatge
Change the controller
Change the safety key
Plug in the power
Put on the safety key
Check the controller line and sensor
system
Turn on the power
Add the lubrication
Adjust the belt
Adjust the belt
Adjust the motor belt
FYTTER |WWW.FYTTER.COM
PAG- 47
Publicité
Table des Matières
