Expanding Loop Using The Gpx Eiswolf; Mounting Example - Alphacool Eisbaer AiO Mode D'emploi

Eisbaer AiO Alphacool International GmbH

EXPANDING LOOP USING THE GPX EISWOLF

 Switch off the PC.
 Loosen the quick release connector (attention, 1-2 drops of water may leak).
 Insert your graphics card with Eiswolf cooler according to the manual.
 Connect the
Eisbaer outlet to the Eiswolf inlet.
 Combine the radiators to a closed circuit.
 Always combine red with blue quick connector parts.
 Top up coolant if necessary.
 Use only clear coolants from our own production (CKC or Eiswasser Crystal – no
UV!) or pure distilled or osmosis filtered water.

MOUNTING EXAMPLE

45