Page 4
EISBAER LT AURORA EISBAER LT Deutsch AMD AM5 / AM4 AMD TR4 / sTRX4 Connect the pump Initial Start Up Using Quick Release Connectors Expanding the Loop with Eiswolf GPU AiO Français Avis général de sécurité Matériel d'installation Details techniques Montage du radiateur Brancher l'eclairage &...
Page 5
Deutsch EISBAER LT AURORA EISBAER LT Deutsch SICHERHEITSHINWEISE Lesen Sie die Sicherheitshinweise, bevor Sie mit der Installation beginnen. MONTAGEMATERIAL RADIATOR Anzahl variiert je & nach Anzahl variiert je LÜFTER Version nach Version M3x5 M3x30 EISBAER KÜHLER 4x 0,5 mm Unterleg- Wärmeleitpaste...
Page 6
EISBAER LT AURORA EISBAER LT Deutsch TECHNISCHE DETAILS [Maße in mm] KÜHLER Eisbaer LT Aurora Eine Halterung für den Sockel 2011-3 Narrow ILM (Art. Nr.: AMD: AM5 / AM4 / TR4 / sTRX4 / 12531) AM3+ / AM3 / AM2+ / AM2 ist separat erhältlich.
Page 7
Deutsch EISBAER LT AURORA EISBAER LT RADIATORMONTAGE Lüfter drückend M3 x 5 M3 x 30 Lüfter saugend M3 x 30...
Page 8
EISBAER LT AURORA EISBAER LT Deutsch LÜFTER & BELEUCHTUNG ANSCHLIESSEN 4-Pin PWM Stromversorgung / Drehzahlregelung über das Mainboard oder Ihre Lüftersteuerung Digital – RGB female Beleuchtungssteuerung über das Mainboard oder den beiliegenden Digital - RGB Controller Digital – RGB male Schließen Sie weitere...
Page 9
Deutsch EISBAER LT AURORA EISBAER LT Anschluss der Beleuchtung an das Mainboard Möchten Sie den beiliegenden Controller nicht verwenden, können Sie die Beleuchtung auch direkt über Ihr Mainboard anschließen und steuern. Wählen Sie die korrekte Verkabelung, in Abhängigkeit von Ihrem Mainboard:...
Page 10
EISBAER LT AURORA EISBAER LT Deutsch VORBEREITUNG CPU • Entfernen Sie die Schutzfolie am Kühlerboden. • Entfernen Sie die Reste der Wärmeleitpaste von der CPU. • Tragen Sie einen erbsengroßen Klecks Wärmeleitpaste auf die CPU auf. • Verteilen Sie die Paste mit Hilfe eines Plastikstreifens oder Ähnlichem zu einer gleichmäßigen, dünnen Schicht (<...
Page 11
Deutsch EISBAER LT AURORA EISBAER LT KÜHLERMONTAGE INTEL 1156 / 1155 / 1150 / 1151 / 1200 / 1700 / 1851 • Wählen Sie die entsprechende Halterung und Schrauben aus. 7,5 mm • Stecken Sie die Halterung, wie dargestellt, zusammen.
Page 12
EISBAER LT AURORA EISBAER LT Deutsch 1700 / 1851 Schraube Druckfeder Muttern Unterlegscheibe 2 mm • Befestigen Sie den Kühler, mit Hilfe der Backplate, auf dem Sockel. Ziehen Sie dabei die Schrauben kreuzweise, handfest an. Kein Werkzeug benutzen nur handfest anziehen!
Page 13
Deutsch EISBAER LT AURORA EISBAER LT INTEL 2011 / 2011-3 / 2066 • Wählen Sie die entsprechende Halterung und Schrauben aus. • Stecken Sie die Halterung, wie dargestellt, zusammen. Schrauben Druckfeder Unterlegscheiben 0,5 mm Kein Werkzeug benutzen nur handfest anziehen!
Page 14
EISBAER LT AURORA EISBAER LT Deutsch Beachten Sie: Einige Mainboards des Sockel 2011/- 3 haben keine durchgehenden Montagebohrungen im Sockelbereich. Drehen Sie die Schrauben in diesem Fall nicht weiter als 4 mm ein. Kein Werkzeug benutzen nur handfest anziehen! AMD AM3+ / AM3 / AM2+ / AM2 •...
Page 15
Deutsch EISBAER LT AURORA EISBAER LT • Schieben Sie die Druckfedern und Unterlegscheiben auf die Schrauben auf und fixieren Sie diese an die Halterung. Schraube Druckfeder Unterlegscheiben 0,5 mm • Für die Montage auf dem Sockel benötigen Sie die Original Backplate des Mainboards.
Page 16
EISBAER LT AURORA EISBAER LT Deutsch AMD AM 5 / AM4 • Wählen Sie die entsprechende Halterung und Schrauben aus. UNC 6-32 10,5 mm • Stecken Sie die Halterung, wie dargestellt, zusammen. • Schieben Sie die Druckfedern und zwei verschiedene Unterlegscheiben auf die Schrauben auf und fixieren Sie diese an die Halterung.
Page 17
Deutsch EISBAER LT AURORA EISBAER LT • Für die Montage auf dem Sockel benötigen Sie die Original Backplate des Mainboards. • Befestigen Sie den Kühler, wie dargestellt, auf dem Sockel. Ziehen Sie dabei die Schrauben kreuzweise, handfest an. Kein Werkzeug benutzen...
Page 18
EISBAER LT AURORA EISBAER LT Deutsch • Schieben Sie die Druckfedern und Unterlegscheiben auf die Schrauben auf und fixieren Sie diese an die Halterung. Schraube Druckfeder Unterlegscheibe 0,5 • Befestigen Sie den Kühler, wie dargestellt, auf dem Sockel. Ziehen Sie dabei die Schrauben kreuzweise, handfest an.
Page 19
Deutsch EISBAER LT AURORA EISBAER LT PUMPE ANSCHLIESSEN • Schließen Sie den 3 - Pin Anschluss der Pumpe an den beiliegenden Digital-RGB Controller an. ARGB-Beleuchtung (vgl. S. 8f.) Stromversorgung Pumpe (3-Pin) Aurora Edition • Möchten Sie den Controller nicht nutzen, können Sie die Pumpe auch direkt an ihr...
Page 20
EISBAER LT AURORA EISBAER LT Deutsch LÜFTER & PUMPE ANSCHLIEßEN Verbinden Sie die Lüfter mit dem PWM Adapter: Anschließend schließen Sie den Lüfter und die Pumpe am Mainbard an: Pumpe Lüfteradapter...
Page 21
Deutsch EISBAER LT AURORA EISBAER LT INBETRIEBNAHME Sollte Ihre Eisbaer LT AiO / Eisbaer LT bei der Inbetriebnahme ungewöhnlich laut sein, hilft es das komplette PC Gehäuse ein wenig hin und her zu kippen. Der erhöhte Geräuschpegel der Pumpe entsteht durch Luftbläschen im geschlossenen System. Diese Bläschen entstehen durch Transport- oder Montagebewegungen.
Page 22
EISBAER LT AURORA EISBAER LT Deutsch ERWEITERN MIT EISWOLF ALL IN ONE • Schalten Sie Ihren PC aus. • Lösen Sie den Schnellverschluss (beachten Sie, dass beim Aufdrehen der Kupplungen, 1-2 Tropfen Wasser austreten können). • Setzen Sie Ihre Grafikkarte mit Eiswolf Kühlung gemäß der Montageanleitung ein.
Page 23
English EISBAER LT AURORA EISBAER LT English SAFETY INSTRUCTIONS Read the safety instructions before starting the installation. MOUNTING MATERIAL RADIATOR number varies & depending on number varies the product FANS depending on the version product version M3x5 M3x30 EISBAER COOLER...
Page 24
EISBAER LT AURORA EISBAER LT English TECHNICAL DETAILS [Dimensions in mm] COOLER Eisbaer LT Aurora Mounting kit for 2011-3 Narrow ILM (Art. Nr.: 12531) is available AMD: AM5 / AM4 / TR4 / sTRX4 / separately. AM3+ / AM3 / AM2+ / AM2...
Page 25
English EISBAER LT AURORA EISBAER LT RADIATOR MOUNTING Pushing fans M3 x 5 M3 x 30 Sucking fans M3 x 30...
Page 26
EISBAER LT AURORA EISBAER LT English CONNECTING FANS & DIGITAL RGB 4-Pin PWM power supply / speed control via the mainboard or your fan controller Digital – RGB female Lighting control via the mainboard or the enclosed digital RGB controller Digital –...
Page 27
English EISBAER LT AURORA EISBAER LT Connect Lighting to the mainboard If you do not want to use the included controller, you can also connect and control the lighting directly via your mainboard. Select the correct wiring depending on your motherboard:...
Page 28
EISBAER LT AURORA EISBAER LT English PREPARATION CPU • Remove the protective film from the cooling plate • Remove any remaining thermal paste from the CPU. • Apply a pea-sized blob of thermal paste to the center of the CPU.
Page 29
English EISBAER LT AURORA EISBAER LT COOLER INSTALLATION INTEL 1156 / 1155 / 1150 / 1151 / 1200 / 1700 / 1851 • Select the appropriate bracket and screws. 7,5 mm • Plug the bracket together as shown. • Slide the compression springs and washers onto the screws and fix them to the bracket.
Page 30
EISBAER LT AURORA EISBAER LT English 1700 / 1851 screw spring Muttern washer 2 mm • Attach the cooler to the socket using the backplate. Tighten the screws crosswise hand-tight. Do not use tools. Tighten only by hand!
Page 31
English EISBAER LT AURORA EISBAER LT INTEL 2011 / 2011-3 / 2066 • Select the appropriate bracket and screws. • Plug the bracket together as shown. • Attach the cooler to the socket as shown. Tighten the screws clockwise, hand- tight.
Page 32
EISBAER LT AURORA EISBAER LT English Note: Some 2011/-3 Socket motherboards have continuous threaded mounting holes in the base. In this case, do not tighten the screws more than 4 mm. Do not use tools. Tighten only by hand! AMD AM3+ / AM3 / AM2+ / AM2 •...
Page 33
English EISBAER LT AURORA EISBAER LT • Slide the compression springs and washers onto the screws and fix them to the bracket. screw spring washer 0,5 mm • For the mounting on the socket you need the original backplate oft he mainboard.
Page 34
EISBAER LT AURORA EISBAER LT English AMD AM5 / AM4 • Select the appropriate bracket and screws. UNC 6-32 10,5 mm • Plug the bracket together as shown. • Slide the compression springs and two different washers onto the screws and fix them to the bracket.
Page 35
English EISBAER LT AURORA EISBAER LT • For the mounting on the socket you need the original backplate oft he mainboard. • Attach the cooler tot he socket as shown. Tighten the screws crosswise hand- tight. Do not use tools.
Page 36
EISBAER LT AURORA EISBAER LT English • Slide the compression springs and washers onto the screws and fix them to the bracket. screw spring washer 0,5 mm • Attach the cooler tot he socket as shown. Tighten the screws crosswise hand- tight Do not use tools.
Page 37
English EISBAER LT AURORA EISBAER LT CONNECT THE PUMP • Connect the pump`s 3 – pin connector tot he supplied Digital-RGB Controller. ARGB-Lighting (vgl. S. 32f.) Power supply pump (3-Pin) ONLY Aurora Edition • If you do not want to use the controller, you can also connect the pump directly to...
Page 38
EISBAER LT AURORA EISBAER LT English FAN & PUMP CONNECTION Connect the fans to the PWM adapter: Then connect the fan and pump to the mainbard: Pump Fan adapter...
Page 39
English EISBAER LT AURORA EISBAER LT INITIAL START UP If your Eisbaer LT AiO is unusually loud during initial operation, tipping the entire PC case back and forth a little can help. The higher volume level of the pump occurs due to air bubbles in the closed system.
Page 40
EISBAER LT AURORA EISBAER LT English EXPANDING THE LOOP WITH EISWOLF GPU AIO • Switch off the PC. • Loosen the quick release connector (attention, 1-2 drops of water may leak). • Insert your graphics card with Eiswolf cooler according to the manual.
Page 41
Français EISBAER LT AURORA EISBAER LT Français AVIS GÉNÉRAL DE SÉCURITÉ Lisez les instructions de sécurité avant de commencer l‘installation. MATÉRIEL D'INSTALLATION nombre nombre RADIATEUR varie en varie en & fonction de fonction de la version du la version VENTILATEURS...
Page 42
EISBAER LT AURORA EISBAER LT Français DETAILS TECHNIQUES [Dimensions in mm] BLOC Eisbaer LT Aurora Un Kit de montage pour 2011-3 Narrow ILM (Article n°.: 12531) est AMD: AM5 / AM4 / TR4 / sTRX4 / disponibles AM3+ / AM3 / AM2+ / AM2...
Page 43
Français EISBAER LT AURORA EISBAER LT MONTAGE DU RADIATEUR Ventilateur Poussée M3 x 5 M3 x 30 Ventilateur Pompée M3 x 30...
Page 44
EISBAER LT AURORA EISBAER LT Français BRANCHER L'ECLAIRAGE & LES VENTILATEURS 4-Pin PWM alimentation électrique / régulation de vitesse via la carte mère ou votre contrôleur de ventilateur Digital – RGB female Contrôle de l'éclairage via la carte mère ou le contrôleur Digital - RGB Digital –...
Page 45
Français EISBAER LT AURORA EISBAER LT Brancher l'eclairage sur la carte mere Si vous ne souhaitez pas utiliser le contrôleur fourni, vous pouvez également connecter et commander l'éclairage directement via votre carte mère. Sélectionnez le câblage correct en fonction de votre carte mère:...
Page 46
EISBAER LT AURORA EISBAER LT Français PRÉPARATION CPU • Enlevez le film protecteur du fond du bloc de refroidissement. • Enlevez les résidus de pâte thermique du processeur. • Posez la pâte thermique à taille d’un petit pois sur le processeur.
Page 47
Français EISBAER LT AURORA EISBAER LT BLOC INSTALLATION INTEL 1156 / 1155 / 1150 / 1151 / 1200 / 1700 / 1851 • Sélectionnez le support et les vis appropriés. 7,5 mm • Branchez le support ensemble tel qu'illustré. •...
Page 48
EISBAER LT AURORA EISBAER LT Français 1700 / 1851 ressort Muttern rondelle 2 mm • Fixez le refroidisseur sur le socle à l'aide de la plaque arrière. Serrer les vis en serrant les vis en croix à la main. N’utilisez pas d’outils.
Page 49
Français EISBAER LT AURORA EISBAER LT INTEL 2011 / 2011-3 / 2066 • Sélectionnez le support et les vis appropriés. • Branchez le support ensemble tel qu'illustré. • Fixez la refroidisseur à la base comme indiqué. Serrez les vis en croix à la main...
Page 50
EISBAER LT AURORA EISBAER LT Français Notez : Quelques cartes mères avec socket 2011/-3 ne disposent pas de trous d’installation percent entièrement la carte mère dans la partie du socket. Dans ce cas-là ne visez pas plus profond que 4mm les vis.
Page 51
Français EISBAER LT AURORA EISBAER LT • Glissez les ressorts de compression et les rondelles sur les vis et les fixez au support. ressort rondelle 0,5 mm • Pour le montage sur le socle, vous avez besoin de la plaque arrière d'origine de la carte mère.
Page 52
EISBAER LT AURORA EISBAER LT Français AMD AM5 / AM4 • Sélectionnez le support et les vis appropriés. UNC 6-32 10,5 mm • Branchez le support ensemble tel qu'illustré. • Glissez les ressorts de compression et deux rondelles différentes sur les vis et fixez-les au support.
Page 53
Français EISBAER LT AURORA EISBAER LT • Pour le montage sur le socle, vous avez besoin de la plaque arrière d'origine de la carte mère. • Fixez la refroidisseur à la base comme indiqué. Serrez les vis en croix à la main.
Page 54
EISBAER LT AURORA EISBAER LT Français • Glissez les ressorts de compression et les rondelles sur les vis et les fixez au support. ressort rondelle 0,5 mm • Fixez la refroidisseur à la base comme indiqué. Serrez les vis en croix à la main.
Page 55
Français EISBAER LT AURORA EISBAER LT BRANCHER LA POMPE • Branchez le connecteur à 3 broches de la pompe au contrôleur Digital - RGB fourni. Éclairage Digital – RGB (vgl. S. 56f.) Alimentation de la pompe (3-Broche) UNIQUEMENT Aurora Edition •...
Page 56
EISBAER LT AURORA EISBAER LT Français CONNEXION DU VENTILATEUR ET DE LA POMPE Connectez les ventilateurs à l'adaptateur PWM : Ensuite, connectez le ventilateur et la pompe au mainbard : Pompe Adaptateur de ventilateur...
Page 57
Français EISBAER LT AURORA EISBAER LT MISE EN SERVICE Si votre Eisbaer LT tout-en-un est anormalement bruyant il peut aider de basculer le boîtier du PC légèrement en avant et arrière. Le bruit est dû aux petites bulles d’air dans le système.
Page 58
EISBAER LT AURORA EISBAER LT Français AGRANDISSEMENT PAR GPX EISWOLF • Eteignez le PC. • Desserrez le raccord rapide (attention, 1-2 gouttes d'eau peuvent fuir). • Insérez votre carte graphique avec le refroidisseur Eiswolf en suivant les instructions du manuel.