Expanding With Eiswolf Aio - Alphacool EISBAER LT Mode D'emploi

EXPANDING WITH EISWOLF AIO

1. Switch off the PC
2. Loosen the quick release connector (attention, 1-2 drops of water may leak)
3. Insert graphics card with Eiswolf cooler
4. Link Eisbaer outlet (red) with Eiswolf inlet (blue)
5. Connect the radiators to a closed circuit
 Always combine red with blue quick release parts
6. Add liquid
 Only use Alphacool Cape Kelvin Catcher (part no.: 18188) or pure distilled or
osmosis filtered water for refilling. Using other liquids will void the
manufacturer's warranty.
38