Alphacool Eisbaer AiO Mode D'emploi page 36

Eisbaer AiO

Attach the cooler to the socket as shown. Tighten the screws crosswise, hand-tight.

Make sure that the window is facing upwards (or that the Alphacool logo can be read
from the front). This design ensures that the pump does not run dry.
Note: Some 2011/- 3 Socket motherboards have continuous
threaded mounting holes in the base. In this case, do not tighten the
screws more than 4 mm.
35
Alphacool International GmbH
Do not use tools.
Tighten only by hand!!