Instalation; Preparing The Cpu - Alphacool XPX 1U Mode D'emploi

INSTALATION

PREPARING THE CPU

If you have a cooler installed, remove it, then:
•
Remove any remaining thermal paste from the CPU.
•
Use a lint free cloth or other material to help. Dried on, stubborn paste can be removed
with alcohol.
•
Apply a pea-sized blob of thermal paste to the center of the CPU. • Spread the paste
using a spatular, or similar to an even, thin layer (< 0.5 mm layer thickness).
PREPARING THE COOLER
Plug in the bracket on the cooler.
Remove the protective film from the cooling plate
9
XPX 1U - English