Assembly Eisblock Xpx Aurora Pro; Preparing The Cpu; Preparing The Cpu Cooler - Alphacool Eisblock XPX Aurora Pro Mode D'emploi

Eisblock XPX Aurora Pro Alphacool International GmbH

ASSEMBLY EISBLOCK XPX AURORA PRO

PREPARING THE CPU

If you have a cooler installed, remove it, then:
• Remove any remaining thermal paste from the CPU.
• Use a lint free cloth or other material to help. Dried on, stubborn paste can be removed
with alcohol.
• Apply a pea-sized blob of thermal paste to the center of the CPU.
• Spread the paste using a spatular, or similar to an even, thin layer (< 0.5 mm layer
thickness).

PREPARING THE CPU COOLER

• Remove the protective film from the cooling plate:
• Note that inlet and outlet are shown inside the thread of the CPU block:
18