Expanding Loop Using The Gpx Eiswolf - Alphacool Eisbaer Aurora Mode D'emploi

Eisbaer Aurora Alphacool International GmbH

EXPANDING LOOP USING THE GPX EISWOLF

• Switch off the PC.
• Loosen the quick release connector (attention, 1-2 drops of water may leak).
• Insert your graphics card with Eiswolf cooler according to the manual.
• Connect the
Eisbaer outlet to the Eiswolf inlet.
• Combine the radiators to a closed circuit.
• Top up coolant if necessary.
→ Use only clear coolants from our own production (CKC or Eiswasser Crystal – no
UV!) or pure distilled or osmosis filtered water.
MOUNTING EXAMPLE
59