Program And Operation; Dome Camera Selection; Accessing The On-Screen Menu Utility; How To Control The On-Screen Menu Utility - Eneo MPP-72A0020MIA Guide D'installation Rapide

Program and Operation

Dome Camera Selection

IF you use the keyboard, before you program or operate a dome camera, you must select
the dome camera by pressing No. + CAM keys.
Example: Pressing 1 , 0 + CAM keys sequentially will select dome camera 10. The selected
dome camera ID will be displayed on the LCD monitor of the keyboard.

Accessing the On-Screen Menu Utility

You can call up the On-screen menu utility on your monitor by pressing the MENU key on
the keyboard or DVR, the following On-screen menu utility will appear:

How to control the On-Screen Menu Utility

Function
Call the On-screen menu utility.
Navigate through the menu items.
Go into the sub-menu items.
Change value.
Enter the editing title mode.
Enter the changing angle mode.
Exit the changing angle mode.
12
Button
MENU
Up or Down
Right, Left or IRIS Open
Right, Left, Tele or Wide
IRIS Open
IRIS Close