ESAB PT-31XL Manuel D'instruction page 90

SECTION 5
5.3.2 Heavy Duty Consumables
The larger electrode diameter increases the electrode mass to provide improved cooling and reduced wear on
medium to heavy cutting applications when correctly used within the recommended cutting range of the plasma
power source. The reversible electrode design gives extra electrode life and enables the safety interlock for op-
erator safety.
WARNING
ELECTRODE
NOZZLE
The use of other than genuine ESAB consumables and replacement parts can cause personal
injury and / or damage to the equipment.
ESAB does not warrant parts for its equipment which are not furnished by ESAB. The use of
parts that are not furnished by ESAB does not automatically void ESAB's warranties for its
equipment. Any obligations otherwise arising from ESAB's warranty will be voided if, but only
if, the design, manufacture or composition of parts or components not supplied by ESAB are
a material cause of the malfunction or poor performance of (or damage to) the equipment.
0.200"
(5.1mm)
P/N 19683
BAFFLE
P/N 19682
30 Amp
(TIP)
HEAT SHIELD
P/N 20282 Standard
Figure 5-4 Torch Front End Heavy Duty Consumables
Heavy Duty
P/N 0558000506 (20463)
6 Stakes
P/N 20079
50 Amp
(Lite Blue)
90
REPLACEMENT PARTS
"Pink"
6 Holes
No
Cross
Hatch