ESAB PT-31XL Manuel D'instruction page 89

SECTION 5
5.3.1 Standard Consumables
These consumable parts will give good cut quality on light to medium thick metals when used within the recom-
mended cutting range of the plasma power source. The reversible electrode design gives extra electrode life and
enables the safety interlock for operator safety.
WARNING
ELECTRODE
The use of other than genuine ESAB consumables and replacement parts can cause personal
injury and / or damage to the equipment.
ESAB does not warrant parts for its equipment which are not furnished by ESAB. The use of
parts that are not furnished by ESAB does not automatically void ESAB's warranties for its
equipment. Any obligations otherwise arising from ESAB's warranty will be voided if, but only
if, the design, manufacture or composition of parts or components not supplied by ESAB are
a material cause of the malfunction or poor performance of (or damage to) the equipment.
0.155"
(3.9mm)
P/N 18205
P/N 18785
BAFFLE
P/N 19667
NOZZLE
15 Amp
(TIP)
HEAT SHIELD
P/N 20282 Standard
Figure 5-3 Torch Front End Standard Consumables
Standard
"White"
4 Holes
5 Stakes 4 Stakes
P/N 18866
30 Amp
(Original Style )
P/N 18844
(Lite Blue)
89
REPLACEMENT PARTS
P/N 18820
50 Amp
Ceramic
(White)