Selecting Programme; Selecting Residual Moisture Controlled Programme; Selecting Mangle Moist Programme; Selecting Time Programme - Schulthess Spirit proLine TRI 9250 Mode D'emploi

Selecting programmes

Selecting residual moisture controlled programme

The electronic sampling system continually checks the
current level of dryness of your laundry and automatical-
ly stops the programme when it reaches the specified
level of dryness.
X Press the programme button corresponding to the de-
sired drying level.
 The control light for the selected programme lights up.
X For easy care fabrics, select the additional «Easy care»
function.

Selecting mangle moist programme

The appliance offers the facility to change the moisture
level by repeated pressing of the «Iron dry 1 and 2»
buttons. 5 levels are possible for each. The display
shows the level selected, whereby the residual moisture
declines as the number increases.

Selecting time programme

Timed programme for drying of individual items of laun-
dry or additional drying of previously dried textiles with
a low moisure content.
Set the drying time according to the type of laundry, the
quantity of laundry and the moisture level.
X Lightly press the programme button.
 The time programme pilot lamp illuminates and the
minimum drying time is displayed.
X Select the drying time up to a maximum of 150 min.
by repeated pressing of the button.

Selecting Wet-Clean programme

These programmes serve to dry textiles which have been
washed with the Wet-Clean procedure first.
X Press the button repeatedly until the desired pro-
gramme will appear on the display.
53

Additional Functions

Alongside the various standard programmes, your dryer
also offers you the opportunity to design your own pro-
grammes. Select first a standard or special programme.
By selecting one or more additional functions, you can
tailor this drying programme to the specifics of your
laundry. These additional functions are only active for
this one drying programme.
X You have the opportunity to tailor your dryer to your
needs by changing the basic settings (see chapter «Basic
settings»). Adjustments to basic settings remain active
until you change them again.

Easy care

For easy care fabrics made of synthetic or mixed fibres,
and cotton with a non-iron finish.

Time selection

If you have chosen a time-controlled drying programme
from the special programmes you can set the length
of the programme with the «Time selection» button.
The drying time required depends on the type and amount
of laundry and how damp it is.
X Press the programme button.
 The time programme control light flashes and the
mini mum drying time is displayed.
X Select the drying time by repeatedly pressing the button.

Gentle drying

With sensible textiles, the button «Gentle drying» can
be pushed. The temperature is reduced.
Start time preselection
By pressing the Start time preselect button one or more
times, the programme start time can be delayed by up
to 23,5 hours.
This makes it possible to take advantage of cheaper
night-time electricity, for example. The start time and
consequently also the end time of a programme can be
tailored to your individual lifestyle.
The display shows the start time and anticipated pro-
gramme time end.
The preselected time starts when the start button is
pressed.
When the start time is reached, the selected programme
starts automatically. The current programme duration
will be displayed.
 In the event of a power cut, the current time is
stored. The duration of the power cut is not taken into
account.
Fast forward
The programme can be shortened or interrupted by
pressing the fast forward button.