Basic Settings; Extended Basic Settings; Z Drying Level; Z Crease Protection - Schulthess Spirit proLine TRI 9250 Mode D'emploi

Basic Settings

The machine has basic settings from the factory. It can
be adapted to the user's individual needs either when
first used or later using the following functions.
The basic settings can only be changed if no dry pro-
gramme is running. To change a basic setting, it is first
necessary to hold the programme button pressed and
then press the fast forward button. The correspond-
ing function is shown on the digital display. The display
changes when the fast forward button
repeatedly with the programme button held down.
Example:
Drying level (ex factory NORMAL)
+
When this function is switched on, the level of dryness
for the moisture controlled programmes (Cabinet and
Extra Dry) is slightly increased and the laundry will be
slightly drier.
Crease protection (ex factory 30MIN)
+
When this function is switched on, the crease protection
phase begins at the end of the programme.
Cool down (ex factory OFF)
+
With this function switched on, the cooling-down phase
is extended in some programmes
Time (the time is not set ex factory)
+
The hours can be set using the
minutes using the
Language (ex factory DEUTSCH)
÷
+
The basic language is changed and is retained even after
switching the machine off or putting it in sleep mode.
is pressed
Function switched off
Function switched on
button and the
button.
55

Extended basic settings

+ +
By pressing these three buttons at the same time, the
display shows the extended basic settings.
X Repeatedly pressing the
settings.
X Pressing the
changed.
X Pressing the
settings.
Child lock (ex factory OFF)
Select «Extended basic settings»!
The child lock is to prevent accidental starting, changing
or deletion of a programme by small children.
Start a programme with the child lock switched on:
+
Hold the start button down and press the fast forward
button.
Button memory (ex factory OFF)
Select «Extended basic settings»!
If the button memory function is activated, the last pro-
grammes used will be saved for both the «Mangle Moist»
and «Wet Clean» programmes. When one of these
programmes is selected again, the last programme used is
automatically selcted.
LCD Brightness (ex factory 150)
Select «Extended basic settings»!
The button can be used to alter the brightness or
text on the display.
LCD Contrast (ex factory 32)
Select «Extended basic settings»!
The button can be used to alter the contrast on the
display.
Alarm volume (ex factory VOLUME 2)
Select «Extended basic settings»!
With the Alarm setting switched on, a signal sounds at
regular intervals at the end of the programme.
The level can be adjusted in 3 levels.
Off
Level 1
Level 2
Level 3
-button shows the possible
- button allows the settings to be
-button ends the display of the