Alarm volume (ex factory VOLUME 2)
Select «Extended basic settings»!
With the Alarm setting switched on, a signal sounds at
regular intervals at the end of the programme.
The volume can be adjusted in 3 levels.
Off
Volume 1
Volume 2
Volume 3
Standby function (ex factory ON)
Select «Extended basic settings»!
When the standby function is switched on, the controls
switch off when no drying programme is running in
energy saving mode. All displays are dark.
Optical interface (ex factory OFF)
Select «Extended basic settings»!
If the optical interface (SCS) is switched on, customer
services can communicate with the machine by PC.
Default language (ex factory German)
Select «Extended basic settings»!
If another language is temporarily selected via the keys
and
, 4 minutes after programme end, in stand-
by mode or after a long standstill, the setting reverts
back to the default language.
58
Cash Card
Inserting the Cash Card
Insert the Cash Card with the p symbol facing upwards.
In the display will appear in succession the amount sto-
red on the Cash Card, the amount on account which
will be deducted, as well as the new Cash Card balan-
ce. Any remaining credit balance stored in the appliance
will be set off.
If the amount available on the Cash Card is not suffi-
cient for the wash, a signal will sound and the remai-
ning amount will appear flashing in the display. The dif-
ference can be settled with a second Cash Card.
Removing the Cash Card
Selecting and starting the drying programme
Select the drying programme
Select the additional functions
Start the programme
Displays during the programme sequence
During the drying programme, the remaining time and
the remaining credit balance are displayed alternately.
Programme end
When the drying programme is completed, the remai-
ning amount is stored in the appliance under the appro-
priate Cash Card. This remaining credit balance will be
set off
at the next washing cycle. The programme end is dis-
played by the display value 00:00h as well as the flas-
hing control lamp «Open door».
Re-crediting
Re-crediting of the remaining credit balance is best
made at the end of a washing day.
Insert the Cash Card. The amount stored on the
Cash Card will appear in the digital display.
Re-credit by pressing the fast run button. In the digi-
tal display will appear in sequence the display the
remaining credit balance which will be credited, as well
as the new Cash Card balance.
Remove the Cash Card.
Re-crediting can always be made only to that Cash
Card from which the amount was originally deducted.
In the case of active child safety device:
+
Remaining value transfer
If there is not an adequately high remaining amount
available on a Cash Card to pay for the booking on
account, this will be displayed by the whistle signal and
by the flashing display with the message saldo to small.
By inserting a second Cash Card, the difference can be
paid.