Numatic TT 516 Mode D'emploi page 3

!
Please read before commencing any operation.
After the removal of all the packaging, carefully open and check the contents.
1
Fig 1
2
4
5
Fit the Brush / Pad (Fig 2).
Swing the floor-tool carrier from
behind the brush. (Fig 3).
Fig 2
Use the two locking knobs fitted to the floor-tool, secure to the
floor-tool to the floor-tool carrier. (Fig 4).
Fig 4
Fill using a hose, bucket or a suitable container. (Fig 5).
Fig 5
Using the handle position lever, move the handle into the
upright position. (Fig 1).
Fill the clean-water tank to a Max of 5 Gall
(see page 6)
For operation and cleaning controls
(see page 9)
3
Quick Set-Up Guide
Tip the machine.
(see Page 4)
0
Gall
3
!
Fig 3