Call Duration Display; Redialling; Muting The Microphone; Adjusting The Receiver Volume - switel T39 clip Mode D'emploi

4.3

Call Duration Display

The call duration is shown in the display in minutes and seconds during a call. The indication
starts after the number has been dialled. The call duration still remains showing in the display for
a few seconds after the call has been ended.
If you want to reset the display during a call, simply press the
immediately to 00:00.
4.4

Redialling

If a connection that you have dialled is engaged or you were unable to get through to anybody,
simply replace the receiver. The last number dialled with a maximum of 32 digits will be saved in
the telephone automatically. To use the redial facility, proceed as follows:
1. Lift the receiver or press the handsfree button
2. Press the redial button B. The saved redial number will now be dialled.
4.5

Muting the microphone

You can switch off the microphone during a call using the mute button
speak without the other party hearing you. The loudspeaker remains switched on and you can
continue to hear the other party.
1. To mute the microphone, press the mute button
indicator light in the button will come out.
2. To switch the microphone on again, press the mute button
will go out and you will be able to continue your call as normal.
4.6

Adjusting the receiver volume

If the receiver volume is too quiet or too loud for you, you can change this to suit your
requirements.
You can use the slide switch
4.7

Adjustable Call Tone

You can use the slide switch
LO (soft) to adapt the ringer volume to your requirements. Should you not want to be disturbed,
use the OFF position.
62
− Operation −
f
on the receiver from soft • to loud
G
underneath the telephone to select the settings HI (loud) or
a
button. The display will reset
b
.
A
once while a call is being made. The
A
once more. The indicator light
•
.
A
. It is thus possible to