4
Operation
4.1
Making a call using the receiver or handsfree function
The telephone can be used like any conventional telephone and, in addition, has some useful
special features, which make phoning considerably easier for you. You have two ways of making
a call:
4.1.1
Making a call using the receiver
1. Lift the receiver and wait until you hear a dialling tone.
2. Now dial the required telephone number. The display shows the number dialled. The display
can show a telephone number with a maximum of 16 digits. If the number dialled is longer
than this, only the last 16 digits will be displayed.
3. To end the call, replace the receiver.
If you want to change during a call from the receiver to the handsfree function, press the
b
button and replace the receiver on the rest.
4.1.2
Making a call using the handsfree function
1. Press the handsfree button
I
will show the
2. Now dial the required telephone number. The display shows the number dialled. The display
can show a telephone number with a maximum of 16 digits. If the number dialled is longer
than this, only the last 16 digits will be displayed.
If the other party accepts the call, his voice will be heard over the in−built loudspeaker. When
using the handsfree facility always speak loudly and clearly towards the telephone.
The volume can be adjusted using the
If you want to change from the handsfree facility to the receiver, simply lift the receiver.
3. To end the call, press the handsfree button
4.2
Receiving Calls
Calls can be accepted either by using the receiver or by using the handsfree function.
Lift the receiver or use the handsfree function by pressing the handsfree button
To end the call, replace the receiver or press the handsfree button
− Operation −
b
. The LED above the button will come on and the display
symbol. You will hear the dialling tone from the in−built loudspeaker.
DE
buttons next to the handsfree button.
b
or replace the receiver.
b
b
.
.
61