How To Use - Tecno-gaz Nebula Manuel D'utilisation

EN Notes and How to use Notes

How to use

*. Using
 Disconnect the chemical tank from the nebulizer..
 Enter the mixture of chemical and water indicated by the manufacturer of the chemical.
 Close the tank cap..
 Turn the dispensing knob above the tank to the right to close the tank valve.
 Connect the tank to the nebulizer until the button separation / link will be blocked.
 Plug the power cord into the socket.
 Open the tank valve by turning the dispensing knob above the tank to the left
 Select the power level using the selector located on the top of the nebulizer.
*. In finishing the use.
 Turn the dispensing knob above the tank to the right to close the tank valve.
 Select the power level using the selector located on the upper part of the nebulizer setting it
to "L".
 Wait about 4-5 seconds until the engine stops.
 Separate the chemical tank from the nebulizer body (the chemical tank can be removed by
pressing the separation / connection button).
In air-spraying and cleaning
 Turn the dispensing knob to the right to close the chemical tank valve.)
 Mount the corrugated tube on the nozzle cap to convey the flow into a collection container.
 Select the power level using the selector located at the top of the nebulizer in "H"..
 At the end of delivery, select the power level using the selector located on the upper part of
the nebulizer setting it to "L". To separate the chemical tank from the body press the
separation / connection button.
* Remove the corrugated tube from the nozzle cap.
3