Tecno-gaz Nebula Manuel D'utilisation page 7

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Notes
 This product is used only for 220Vac 50Hz
 Protection degree: IPx4
 Use the indicated fuse: 250V - 10A.
 When using chemicals, it is necessary to follow the manufacturer's instructions.
 Nell'utilizzare e spruzzare prodotti chimici tossici, è necessario utilizzare i dispositivi di
sicurezza indicati dal fabbricante.
 Only the person with sufficient related knowledge should operate the Nebula.
 Don't put fiammable agents (gasoline, thinner, kerosene, diesel and so on) into the
chemical tank.
 It is necessary to push the air release push botton until be air is completely released after
use.
 It is necessary to wash the chemical tank with water and to spray water into it for 30~60
seconds after use.
(Otherwise the product van be blocked or damage due to the remaining chemical).
 The machine is wet or sinks into water, it should not be supplied with power.
In this case, you should contact our service center. It can cause fire or electric shock.
 In checking error or putting chemicals, it is necessary to disconnect the power cord.
 It is necessary to look around and to be careful so as not to spray others in spraying
chemicals.
 It should be kept in the places where children can't approach.
 Do not tamper with the product.
Notes and How to use Notes
2
EN

Publicité

Table des Matières
loading

Table des Matières