Display Contrast Adjustment - Eureka Mignon MEB Manuel D'instructions

• Single dose Button (18)
of the dispensed continuous doses;
On the display, only the selected buttons remain on and the number of doses are shown
as pairs of numbers, in order, to show the total count. .
For instance, if the dose total is 142536, the display shows the digits 14, 25, and 36
(each one for two seconds).
After the last pair of digits, it stops for 4 seconds and then the sequence restarts.
To exit the count, press the Grinding Start Button (6).
5.4.6

DISPLAY CONTRAST ADJUSTMENT

When starting the machine, hold the Grinding Start Button (6) and then press the (16)
or (17) to access the Contrast Adjustment. On the display, only the Buttons
(16) and (17)
(6).
5.5 GRINDING SETTING (FIG. A)
Turn the Adjustment Knob (7-8-9) clockwise for more finely ground coffee and counter-
clockwise for a coarser grind. The adjustment is to be made gradually, by grinding a little
coffee every 1-2 notches..
If the Knob is turned with the motor in standstill, the appliance could stop.
The Adjustment System EASY SETTING (8), if fitted, makes this procedure easier and
allows user to adjust Grinding Setting in a quick and intuitive manner in accordance with
the required final product.
5.6 POSITIONING THE FIXED FORK
Insert the Filter Holder Fork (11) (Fig. 7) into its seat.
WARNING
Do not use the Fork (12) (fig. 8) without having fixed it using the apposite screw.
5.7 FILTER HOLDER FORK ADJUSTMENT (FIG.6)
• Insert the Filter Holder Fork (10) (Fig. 7) into its seat.
• With a screwdriver, loosen the Fixing Screw of the Filter Holder Fork (6). Do not
loosen the Screw completely.
• Lift or lower the fork to adjust it according to the Filter Holder Dimensions.
• Once the correct position has been found, tighten the Fork Fixing Screw (10).
• The Fork is suitable for any kind of Filter Holder available on the market.
36
and double dose Button (19)
To exit Contrast Adjustment, press the Grinding Start Button
EN
: access to the count