Product Description; Locking The Container - Eureka Mignon MEB Manuel D'instructions

EN
3

PRODUCT DESCRIPTION

1. Container Lid
2. Coffee Beans Container
3. Coffee Beans Container Opening/
Closing Tab
4. Touch-screen Display
5. Spout
6. Activation Button for grinding
7. Setting Knob for grinding
8. EASY SETTING Regulation Knob
9. Setting Knob FILTER grinding
10. Adjustable Filter Holder Knob
11. Fixed Fork
12. Plastic Fork
13. Ground Coffee Basket
4

LOCKING THE CONTAINER

Before operating the appliance, it is necessary to fit the Coffee Bean Container (2).
• Insert the Container (2) into its seat (Fig. 2), positioning it so that the hole lines up
with the screw on the back part of the appliance.
• Tighten the lock screw (12) (Fig. 3).
5 SETTING AND USE
5.1 PREPARATORY OPERATIONS
It is important to set up the Grinder in relation to your coffee type (more or less roasted)
and grind.
• Evaluate the type of coffee (more or less roasted).
• Evaluate the grinding level.
• If equipped with Adjustable Fork (10), set it at the required height (Fig. 6).
• Insert the Container (2) in its position (Fig. 2).
• After having set the electric connection, pull the tab (3) on the bottom of the Coffee
Bean Container (2) to close it (Fig. 4). Then, set up dose programming.
• Remove the Cover (1) of the Container (2) and fill it with coffee beans.
• Put the Cover back (1) and push the Lid (9) so that the beans are able to fall all the
way down.
5.2 MANUAL MODE FUNCTION
• Lay the Filter Holder on the Fork (10/11/12) (Fig. 9) or position the Ground Coffee
Basket (13) under the outlet chute (5)(Fig.10).
• Push the Filter Holder, or position the Ground Coffee Basket (13) under the Outlet
14. Display Dispensing Time/Dose
Counter
15. Continuous Mode On
16. Decreasing Key
17. Increasing Key
18. 1 Cup Button
19. 2 Cups Button
20. Fixing Screw of the Coffee Beans
Container
21. Power button
22. Manual/Timer Mode Button
23. Potentiometer Timer Button
24. Side Button Grinding Trigger
25. Side Button Grinding Trigger
33