Eureka Mignon MEB Manuel D'instructions page 35

EN
and (17) to increase or decrease the dispensing time of the selected dose (the
time is shown in seconds on the display).
• If the (16) or (17)
decrease in accordance with the length of time for which it is held.
To pause the automatic dispensing before the grinding time has elapsed, press
the grinding Start Button (5) with the Filter Holder:
• Press the Button (5) again to restart the dispensing for the remaining time.
• Hold the Button of the selected dose (a blinking light will shine through the
indicator) to stop dispensing and the grinding time will return to the original
value at which it was set.
5.4.3 CONTINUOUS DISPENSING
Press the single dose (18)
access Continuous Dispensing mode.
• The symbol (15)
Continuous Dispensing lasts up to a maximum of 60 seconds.
• To exit Continuous Dispensing mode, hold either the single dose (18)
double dose(19)
5.4.4 LOCKING THE TIME
Press the Buttons(16)
• When the Buttons are released, the dose dispensing time will stop changing and the
(16) and (17)
• Press both Buttons (16)
5.4.5 DOSE COUNTS
When starting the machine, hold the Grinding Start Button (6) for 5 seconds and then
select one of the following:
• Single dose Button (18)
• Double dose Button (19)
, buttons are held, the dispense time will increase or
and double dose (19)
appears on the display.
Button for a few seconds.
and (17) at the same time.
will disappear.
and (17)
: access to the count of the dispensed single doses;
: access to the count of the dispensed double doses;
. buttons at the same time to
again to unlock the functions.
or the
35