Product Description; Locking The Container; Turning The Machine On - Eureka MIGNON Manuel D'instructions

EN
3

PRODUCT DESCRIPTION

1. Container lid
2. Coffee beans container
3. Coffee beans container opening/
closing tab
4. Touch-screen display
5. Spout
6. Activation button for grinding
7. Adjustable filter holder knob
8. Setting knob for grinding
9. Switch on button
4

LOCKING THE CONTAINER

Before operating the appliance, it is necessary to fit the coffee bean container (2).
• Insert the container (2) into its seat (Fig. 2), positioning it so that the hole lines up
with the screw on the back part of the appliance.
• Tighten the lock screw (16) (Fig. 3).
5 SETTING AND USE
5.1 PREPARATORY OPERATIONS
Looking at the type of coffee (more or less roasted) and grinding, it's necessary to set
up the grinder before working with it.
• Evaluate the type of coffee (more or less roasted).
• Evaluate the grinding level.
• Insert the filter holder fork (7) (Fig. 6) into its seat.
• After having set the electric connection, pull the tab (3) on the bottom of the coffee
bean container (2) to close it (Fig. 4). Then, set up dose programming.
• Remove the cover (1) of the container (2) and fill it with coffee beans.
• Put the cover back (1) and push the lid (3) so to let the beans go all the way down.
5.2 DISPLAY FUNCTIONING
5.2.1

TURNING THE MACHINE ON

When starting the machine for the first time, the appliance has the factory default
settings. In the subsequent starts, it keeps the settings preceding the last turning
off.
When starting, the display loads the firmware and gets ready for dispensing.
ME041-5-5A-A0-R00_MANUALE ISTRUZIONI MIGNON XL IT-EN-DE-FR-ES.indb 129 ME041-5-5A-A0-R00_MANUALE ISTRUZIONI MIGNON XL IT-EN-DE-FR-ES.indb 129
10. Display dispensing time/dose
counter
11. Continuous mode on
12. Decreasing key
13. Increasing key
14. 1 cup button
15. 2 cups button
16. Fixing screw of the coffee beans
container
29
03/12/2020 15:50:20 03/12/2020 15:50:20