Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• HOW TO USE AND OPERATE YOUR UNIT
Heating up: Put the plug in the socket.
o
1)
Turn the thermostat fully to the right (maximum setting).
2)
Buttons for the different heat settings:
•
Off = both switches are off
•
Level I = left switch «I» on, min. power (800W)
Level II = right switch «II» on, med. power (1200W)
•
•
Level III = both switches on, full power (2000W)
The respective indicator lights will light up.
• ADJUSTING THE TEMPERATURE
o
As soon as the temperature set on the unit has been reached in the room, turn the
thermostat knob slowly to the left until the indicator light goes out. The thermostat
will now automatically control and maintain the prevailing temperature of the room
• CLEANING AND CARE
o
The unit does not require any special care. It is sufficient to wipe off any dirty areas
with a soft cloth when the unit is cold. Do not use any sharp or abrasive cleaning
agents and solvents.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
27
Publicité
Table des Matières
