• GENERAL
Take the unit out of the packaging. Remove any polystyrene and packaging material
o
that is still stuck on the unit.
o
Check whether the unit has been damaged in transit and whether the power supply
cable is intact.
• ASSEMBLING THE CASTORS
o
Carefully turn the radiator around so that you can easily mount the castors.
Insert the U-shaped bracket from below into the linking connection between the first
o
and the second, as well as between the last two fins.
Now secure the holder for the castors with two wing nuts on the U-bracket.
o
• ELECTRICAL CONNECTION
o
Before plugging the plug into the socket, make sure that the voltage indicated on the
rating label of the unit is the same as that of the mains in your home, and that the
mains plug and power line are dimensioned according to the load required.
o
Please make sure that the plug socket used for the power is properly earthed.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
26