How To Use And Operate Your Unit; Adjusting The Temperature; Cleaning And Care - Rotel U7304CH Mode D'emploi

• HOW TO USE AND OPERATE YOUR UNIT

Heating up: Put the plug in the socket.
o
1) Turn the thermostat fully to the right (maximum setting).
2) Buttons for the different heat settings:
•
Off = both switches are off
•
Level I = left switch «I» on, min. power (600W)
•
Level II = right switch «II» on, med. power (900W)
•
Level III = both switches on, full power (1500W)
The respective indicator lights will light up.

• ADJUSTING THE TEMPERATURE

As soon as the temperature set on the unit has been reached in the room, turn the
o
thermostat knob slowly to the left until the indicator light goes out. The thermostat
will now automatically control and maintain the prevailing temperature of the room

• CLEANING AND CARE

The unit does not require any special care. It is sufficient to wipe off any dirty areas
o
with a soft cloth when the unit is cold. Do not use any sharp or abrasive cleaning
agents and solvents.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
27