Frost Protection; Overheating Protection; Maintenance And Care - Rotel TURBO SYSTEM 2200 Mode D'emploi

advantage of being able to use the appliance as a cooling fan during the warmer
months of the year.
 COOL AIR
o
Turn the thermostat knob (4) clockwise up to the stop (Pos. 6), then press the
"Ventilation" switch (4). Now the fan cools the air.
o
Important: Do not switch the heating buttons on.
 FROST PROTECTION
o
Setting the heating level you want. Set the thermostat knob (4) to the minimum
temperature. When the temperature falls under approx. +5°, the indicator light
lights up and the appliance switches off automatically. The indicator light goes out
as soon as the room temperature is over 5° Celsius.
 OVERHEATING PROTECTION
o
This appliance has a safety thermostat, which switches off the fan ad heating if
there is a malfunction or if the appliance is not being used properly. Rectify the
cause of the overheating and leave the appliance to cool down for 5 min. When you
start it again, reset the thermostat to the setting you want. If the appliance still
does not work, please inform the responsible customer service office.
 MAINTENANCE AND CARE
o
The convector does not require any kind of special maintenance. Remove any dirt
with a soft cloth after the appliance has cooled down. Do not use any sharp or
abrasive cleaning agents.
 DISPOSAL
o
For proper disposal, the unit is to return to the dealer, the service agent or the
company Rotel AG.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use