Assembling The Castors; Electrical Connection; How To Use And Operate Your Unit - Rotel U7302CH Mode D'emploi

 ASSEMBLING THE CASTORS
o
Carefully turn the radiator around so that you can easily mount the castors.
o
Insert the U-shaped bracket from below into the linking connection between the first
and the second, as well as between the last two fins.
o
Now secure the holder for the castors with two wing nuts on the U-bracket.
 ELECTRICAL CONNECTION
o
Before plugging the plug into the socket, make sure that the voltage indicated on the
rating label of the unit is the same as that of the mains in your home, and that the
mains plug and power line are dimensioned according to the load required.
o
Please make sure that the plug socket used for the power is properly earthed.
 HOW TO USE AND OPERATE YOUR UNIT
o
Heating up: Put the plug in the socket.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
Turn the thermostat fully to the right (maximum setting).
Buttons for the different heat settings:

Off = both switches are off

Level I = left switch «MIN I» on, min. power (600W / 800W)

Level II = right switch «MID II» on, med. power
(900W / 1200W)

Level III = both switches «MAX» on, full power
(1500W / 2000W)
The respective indicator lights will light up.
24
U7302CH_BED_DFIE_Rev02_2018-06-07.docx