Replacing The Plug Fuse (12/24 V); Replacing The Light Bulb - Mobicool FR35 DC Manuel D'utilisation

Operation
➤ Leave the cover open.
➤ Wipe off the defrosted water.
6.10

Replacing the plug fuse (12/24 V)

➤ Pull the adapter sleeve (fig. 5 4, page 3) off of the plug.
➤ Unscrew the screw (fig. 5 5, page 3) out of the upper half of
the housing (fig. 5 1, page 3).
➤ Carefully raise the upper half of the housing from the lower
(fig. 5 6, page 3) half.
➤ Take out the contact pin (fig. 5 3, page 3).
➤ Replace the defective fuse (fig. 5 2, page 3) with a new one
that has the same rating (8A 32V).
➤ Re-assemble the plug in the reverse order.
6.11

Replacing the light bulb

➤ Press the switch pin (fig. 6 2, page 3) downwards so that the
transparent part (fig. 6 1, page 3) of the lamp can be removed
at the front.
➤ Replace the light bulb.
I
NOTE
The LEDs in the light bulb must be aligned with the transparent
part of the lamp.
➤ Press the transparent part of the lamp back into the housing.
30
FR35 DC, FR35 AC/DC
EN