Honeywell IAQPoint2 Guide De Démarrage Rapide page 1441

Unpacking
After opening the package and removing the equipment and components,
make sure that you have all the items described on the order form or
packing slip.
Description
The 901T Detector is a gas detection device built, sold, and serviced by
Vulcain. Vulcain offers a built-in Floor Level Network (FLN)
communication driver and point database allowing the detector to coexist
on an APOGEE network with other FLN devices. This document
describes how the 901T can be accessed through a field panel and how it
can be used as a part of a larger control scheme.
The 901T can be shipped with one of four sensor types: CO, O
and combustibles.
Installation Guidelines
A Vulcain representative is responsible for proper configuration of the
detector for its primary application, while a Siemens Building
Technologies representative is responsible for field panel programming, to
make use of the detector's functionality in the building automation system.
As such, there must be coordination between Vulcain and Siemens
Building Technologies representatives to ensure that programming of the
901T is consistent with requirements for field panel programming.
• Make sure to locate the detector and sensing assembly(ies) in an
area easily accessible to a technician.
• Avoid any location where the detector could be subject to vibrations.
• Avoid any location close to noisy equipment.
• Avoid any location where temperature changes occur rapidly.
• Verify all the requirements and existing regulations which may affect
the choice of location.
• If the equipment is not used in the manner specified, protection
provided may be impaired.
Introduction
901T User Manual
Introduction
Installation Guidelines
, NO
2
,
2
9