Installing The Pc Screen (Im-3Ld4D); Cable Connection (Im-3Ld4D) - Optika Italy IM Serie Manuel D'instructions

7.8

Installing the PC screen (IM-3LD4D)

• For the camera installation, please refer to chapter 15.1.
1. Align the notch ① with the bracket ② on the illuminator.
(Fig. 13)
2. Once the monitor is fully inserted, tighten the wheel ③
to lock the monitor. (Fig.14)
7.9

Cable connection (IM-3LD4D)

1. Connect the USB mouse / keyboard receiver in the slot
"A" of the PC stick.
2. Plug the USB3.0 cable in the slot "B" of the PC stick.
3. Plug the PC stick power supply cable in the slot "C".
4. Plug the HDMI cable in the slot "D" of the PC stick. (Fig.
15)
5. Plug the microscope LED power supply in the connec-
tor "E" of the microscope illuminator. (Fig. 16)
Page 20
①
②
③
F ig. 13 F ig. 13
F ig. 14 F ig. 14
F ig. 15 F ig. 15
F ig. 16 F ig. 16