Installing The Stage Insert; Installing The Eyepieces; Installing The Condenser - Optika Italy IM Serie Manuel D'instructions

7.3

Installing the stage insert

1. When using the glass stage, make sure that the insert
is horizontal.
2. Install the stage insert in the stage opening. (Fig. 5)
7.4

Installing the eyepieces

Insert both eyepieces into the tubes of the optical head.
(Fig. 6)
7.5

Installing the condenser

1. Insert the condenser illumination unit into the bracket.
(Fig. 7)
2. Turn the condenser illumination unit clockwise about
90°, with the "AS" mark of filter holder facing front. Align
the screw of the condenser illumination unit and the
hole of the holder, then screw the bolt in the hole with
the supplied Allen wrench. (Fig. 8)
Page 18
F ig. 5 F ig. 5
F ig. 6 F ig. 6
F ig. 7 F ig. 7
F ig. 8 F ig. 8