Positioning the Dishwasher
10
•
If your sink is to the right side of where you are installing
the dishwasher, you will need to reposition the hoses and
power cord behind the dishwasher before installing .
•
To do so, unhook the strap that the hoses are running
through on the back of the dishwasher base and position
them per your requirements .
•
If your sink is to the left side, leave the hoses and power
cord as they came .
11
•
Reposition the hoses so they run through the strap on the
other side .
•
Be sure to snap the strap back in place to secure the hoses
as shown .
12
NOTICE :
Be sure to pull the hoses all the way into the
adjacent cabinet while pushing the dishwasher in . Otherwise,
the hoses can fold, kink or break, potentially causing obstruc-
tions or leaks .
12
•
To avoid scratching the floor, use floor protection and
caution when sliding the dishwasher into the cabinet . Use
hands on both sides of dishwasher to push evenly .
•
Pull water inlet, drain hose and power cord through the
hole in cabinet as shown .