4
•
Pull the drain hose out of the packaging base as shown .
•
Set toe panel aside for later use .
5
a
a
•
Attach elbow connection to dishwasher as shown . Do
not overtighten .
b
b
•
Attach hot water line to elbow .
Note: For a easier access to the hot water inlet connection,
tip unit slightly forward with someone holding the front side
of the unit .
!
WARNING
DO NOT tip the dishwasher too far forward! This
could cause serious injury or death . Always have an
adult hold the front side if the unit is tipped .
8
NOTICE :
Avoid cross-threading! It will cause leaks . After
attaching hose, turn on water and check for leaks .
6
•
Remove the hose clip at the back of the dishwasher as
shown . The hose clip may be used later to hold the drain
hose inside your cabinet .