Tools & Materials - Thermador DWHD650WFM Instructions D'installation

Tools and Materials Needed
ø1/16 in
(2 mm)
Tape Measure
Drill Pliers
Adjustable wrench Hole Saw Needle Nose Pliers
Flat Screwdriver
Wire Cutter Wire Stripper Level
Phillips Screwdriver
Elbow connection with 3/4" female hose threads on one end and fits your water supply line
(copper tubing, compression fitting, or braided hose) on the other .
Hot Water Supply Line - Minimum 3/8" O .D . copper tubing or metal braided dishwasher supply line .
Only needed if house water supply line is not sufficient .
Shut-off valve and fittings appropriate for hot water supply line
(copper tubing/compression fitting, or braided hose) .
5