Enclosure Requirements
!
WARNING
Scalding or Electrical Shock Hazard!
Make sure the water supply and electrical supply are
shut off before installation or service .
Electrical Shock/Fire Hazard!
Do not allow the electrical and supply lines to touch .
1
min 24"
(610 mm)
23
5/8
(600 - 616 mm)
Note: This dishwasher is designed to be enclosed on the top,
back and both sides by standard residential kitchen cabinetry .
•
Select a location as close to the sink as possible for easy
access to water supply and drain lines .
•
For proper dishwasher operation and appearance, ensure
that the enclosure is square and has the dimensions
shown .
2
•
If the dishwasher is to be installed in a corner, ensure that
there is adequate clearance to open the door as shown .
min 34"
(864 mm)
" - 24
"
1/4
3
7"
(177.8 mm)
•
After locating the proper place for your dishwasher, create
required openings in your cabinets in order to allow for
water, drain and electrical lines on the appropriate side .
•
The holes should be cut within the 7 x 2 .5" area shown .
•
If the opening is made through wood, sand it smooth .
•
If the opening is made through metal, use the Edge
Protector with Power Cord clips Kit SMZEPCC1UC, or other
approved method to protect wiring from damage .
7