9.2
GD36M GLASS FRONT INSTALLATION / REMOVAL
FLAT PLASTIC
WASHER
PLASTIC
SHOULDER
WASHER
CAP
A.
NOTE: Ensure threaded
rod is completely
threaded into the cap.
Place plastic shoulder washer
over threaded rod.
Run the rod through the hole
B.
the glass facia (silk screen side
toward appliance).
Place fl at plastic washer over
C.
threaded rod.
Place bracket over threaded rod with
D.
it's return fl ange towards the center
of the glass and secure with the hex
nut (use tool provided to hold the cap).
CAUTION: Do not over tighten.
Lift the glass facia and engage tabs into slots on front panel of the appliance.
E.
9.3
TOP PRP PANEL INSTALLATION GD36M
Place the top porcelain panel behind the back and side porcelain panels as illustrated.
A.
THREADED
ROD
GLASS
FACIA
SIDE
PORCELAIN
PANEL
BRACKET
HEX NUT
TOP DEFLECTOR
TOP PORCELAIN PANEL
SIDE
PORCELAIN
BACK
PANEL
PORCELAIN
PANEL
FRONT
PANEL
W415-1132 / C / 08.20.13
45
EN
in