Insert The Milling Cutter Or Diamond Grinder - Faro MT02 L Mode D'emploi

Operation 91

5.3 Insert the milling cutter or diamond grinder

Note
Only use carbide cutters or diamond grinders that comply with ISO
1797-1 type 3, are made of steel or hard metal and meet the following
criteria:
- Shaft diameter: 1.59 to 1.60 mm
- Overall length MT02 L:
max. 25 mm
- Overall length MT02 Mini L: max. 21 mm
- Shaft clamping length MT02 L:at least 11 mm.
- Shaft clamping length : MT02 Mini L:at least 9 mm
- Blade diameter: max. 2 mm