Removing The Milling Tool Or Diamond Grinder - Faro MC01 RL Mode D'emploi

MC01 R / RL - Instructions for use - EN

5.4 Removing the milling tool or diamond grinder

WARNING
Hazard from rotating cutter or grinder.
Lacerations and damage to the chucking system.
 Do not touch rotating cutter or grinder
 Never press the press-button while the cutter or grinder is rotating!
 Remove the cutter or grinder from the contra-angle handpiece after treatment to avoid injury or infection while storing it.
 After the cutter or grinder has stopped rotating, press the press-button with your thumb and simultaneously pull out the drill bit or bur.
46